Rode Videomic Pro + On Camera Shotgun Condenser Microphone
Switch from using the built-in mic on your camera or portable recorder to the. Camera-mount shotgun microphone for improved sound quality at greater distances. With versatile battery/USB power options, upgraded RF immunity, adjustable gain, and multiple clarity-enhancing features, the VideoMic Pro+ is ideal for mobile journalists, vloggers, and run-and-gun shooters. The reworked windscreen design minimizes wind noise, making it well suited for outdoor shoots. The 3.5mm TRS output and detachable cable ensure proper hookup to your camera, and the selectable safety channel prevents accidental distortion. Its low-noise electronics and sensitive condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders. A detachable straight 3.5mm cable is included for easy hookup to your camera. The microphone's 3.5mm TRS jack is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
Included with the VideoMic Pro+ is the LB-1, a rechargeable and removable lithium-ion battery that provides up to 100 hours of operating time per charge. If you don't have time to recharge the LB-1, just remove it and pop in two AA batteries (available separately) instead. The built-in battery door stays attached to the mic and simplifies battery changes. You can even power the mic via a USB connection to an external battery pack or charger.
Manual or Automatic Power On/Off. In addition to a power button, this microphone features a defeatable auto on/off function that mitigates unnecessary battery usage. When connected to the mic input of a compatible camera, the VideoMic Pro+ automatically turns on or off in response to the presence or absence of plug-in power. So, the mic shuts off when it detects a loss in power, either from powering off or disconnecting the camera.
Bass Roll-Off and Treble Boost. The high-pass filter can be set to 75 Hz or 150 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic. Knowing that intelligibility is crucial, Rode outfitted the VideoMic Pro+ with a selectable high-frequency boost, which enhances detail and clarity in the treble range. To enable optimal recording levels, the VideoMic Pro+ boasts a 3-stage gain control.
Like the low roll-off and high-frequency boost, the gain control is digitally switched for precision and convenience. The +20 dB setting is ideal when recording to cameras, as it boosts the signal without requiring extreme gain on the camera's inferior preamp. Select the flat setting when routing the mic into a dedicated high-quality preamp, or switch to the -10 dB option when loud sound sources threaten to distort your recording. When source levels get unexpectedly louder, you risk overloading the recording. By pressing the power and dB buttons simultaneously, you can set the mic's right channel to output 10 dB lower than the left channel.
Additional LEDs are allocated for indication of the safety channel, high-pass filter, high-frequency boost, and gain settings. An onboard light sensor allows it to adjust the LED brightness level in response to ambient light. Integrated Shock Mount Inhibits Vibrations. Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera.
Plus, the bottom of the shockmount features a camera shoe mount with a 3/8 thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately). The VideoMic Pro+ has an updated and optimized foam windscreen to minimize unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat VMPR+ (available separately). Expand the microphone's device compatibility with Rode accessories such as the SC4 and VXLR (both available separately). The SC4 is a short cable that lets you connect the VideoMic Pro+ directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR adapter is the ideal solution when you want to record the VideoMic Pro+ to a camcorder or mixer that has XLR inputs. The item "Rode VideoMic Pro + On Camera Shotgun Condenser Microphone" is in sale since Monday, October 7, 2019. This item is in the category "Cameras & Photo\Camera & Photo Accessories\Microphones".
The seller is "guynofff" and is located in Purcellville, Virginia. This item can be shipped to United States.
- MPN: Does Not Apply
- Brand: Rode
- Model: VMPRPLUS
- Weight: 0.26lbs.
- Polar Pattern: Shotgun
- To Fit: Camera
- Features: High-Pass Filter
- Connectors: 3.5 mm (1/8 in) TRS
- Mount Type: Hot/Cold Shoe
- Custom Bundle: No
- Connectivity: Wired Standard
- Operation Mode: Mono
- Microphone Form Factor: Handheld/Stand-Held