You are here:

mount

   Rode Microphones NTG-2 Dual Powered Lightweight Directional Condenser Shotgun Microphone Value Kit with RODE Blimp. NTG2 Multi-Powered Shotgun Microphone The Rode NTG2 is a lightweight condenser shotgun microphone, designed for professional applications within the film, video, television and production industries. Its full frequency response, low noise and audio transparency make it an ideal film, video, and voice over microphone, while its low weight (5.7 oz/161g without battery) makes it an ideal boom microphone. In addition to the native 20Hz-20kHz frequency response a selectable ...
   Package Includes: Sennheiser MKE600 Mic w/ Foam Windscreen & Camera Shoe Mount Rycote Classic 18cm Softie (19/22 Std Hole) Rycote Universal Shock Mount w/ Brass Shoe Adapter The MKE 600 from Sennheiser is a shotgun microphone designed for use with a camcorder or video DSLR. Building on the company's extensive expertise in designing shotgun microphones, it is able to take on even the toughest video sound challenges, while still being compact and short relative to previous models. With its high level of directivity, the microphone focuses on the sounds in front of the camera, while ...
   The RØDE NTG3 super cardioid shotgun microphone is designed for professional use on film, television, ENG and wherever high resolution broadcast audio is required. As RØDE's premier directional microphone the NTG3 exhibits superlative audio quality with a rich warm quality and a full frequency response. Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue. Machined from solid brass and nickel plated with an anti-glare finish, the NTG3 is incredibly robust while ...
   Boya PVM1000 Pro Shotgun Microphone with Shock Mount and Pro Fluffy. Balanced output ensures a clean signal even in high-output conditions. This package comes complete with the Boya P140 professional fluffy windshield. Designed especially for use with camcorder or video DSLR. Maximum rejection of side and rear of microphone. Included shock mount with 3/8 thread and shoe-mount adaptor. Foam Windshield and Sock included. 1.5m Female XLR to TRS 3.5mm Jack Cable and 6.35 mm adapter included. Powered by 48V Phantom Power or 1.5 AA battery. Sensitivity : -33dB +/- 1dB / 0dB=1V/Pa, 1kHz. ...
   Sennheiser MKH-416 P48 Condenser Shotgun Microphone. With Sennheiser Case, Sennheiser Windscreen and Sennheiser Mount. With all paperwork, original box, case, windscreen, and microphone mount. Has been beneath the windscreen since day one and kept. In a sealed bag when not in use. Contact me with any questions, thanks! The item "Sennheiser MKH-416 Short Shotgun Interference Microphone Case Windscreen & Mount" is in sale since Wednesday, September 18, 2019. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Microphones & Wireless Systems". The seller ...
   Rode Blimp Windshield and Mount System! (microphone in photo is not included). Blimp Windshield and Rycote Shock Mount Suspension System. Is designed to provide your shotgun microphone with protection from wind noise and isolation from shock and vibration. It fits the Rode NTG1, NTG2, NTG3, NTG4 and NTG4+ and any shotgun mic up to 12.75 in length. The Blimp attaches to any standard boompole with the 3/8 thread attachment at the base. Housed inside the grip is a Mogami microphone cable which splits via a junction box to a flexible thin cable inside the Blimp, to minimize the ...
   Hair Care & Styling Products. Scale Models, Toys & Hobbies. Sony ECM-NV1 Shotgun Microphone & HVR-A1E 2x XLR Hot Shoe Mic Adapter Mount Kit. If you receive a package that is damaged , it is most likely damaged during the transportation process. Deliveries by courier services DO NOT deliver to PO Boxes so please provide us with a physical address Depending on your postal area, we use. Any defects or damage as a result of using the goods in a manner other than its intended or customary use. Breakage or damage to the casing. All plastic surfaces and all other externally exposed...
   1 Sennheiser ME66 Super Cardoid Professional Shotgun Condenser Microphone Capsule. 1 Sennheiser K6 Powering Module Issue: battery powered only! Cable supplied Phantom power is not working. 1 Rycote Mini Wind Jammer which includes both a foam and fur windscreens. 1 Shock mount microphone holder. Sturdy ShockMount holder with extra suspension O rings. 3/8-5/8 adapter for use with microphone stands. Hot shoe adapter for camera-top mounting. The ME66 microphone capsule is in good pre-owned condition! The K6 powering module is missing one screw, only works with battery power and ...
   The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. At the heart of the VideoMic Pro is an all-new 1/2 condenser capsule that provides broadcast-quality audio via a 3.5mm mini jack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera. The integrated Rycote®...
   Tripod & Monopod & Tripod Head. For Mark Down Promotion Tool. DEITY V-Mic D3 Pro Broadcast Super-Cardioid Shotgun Microphone+D-XLR+Shock Mount. Inside the V-Mic D3 Pro lives a microprocessor that digitally shakes hands with the audio input its been plugged into. We have tested it on a dozen DSLR models, two dozen phones, a handful of Android based tablets, and the microphone inputs on laptops. When plugged into devices that have a stereo microphone input, the V-Mic D3 Pro outputs dual mono tracks. It can also be adapted to some microphone inputs that use the mini XLR jack....

Pages